en/ACS800-04/U4 Hardware Manuals - VAE ProSys sro

83Installation checklistChecklistCheck the mechanical and electrical installation of the drive before start-up. Gothrough the checklist below together with another person. Read the Safetyinstructions on the first pages of this manual before you work on the unit.CheckMECHANICAL INSTALLATIONThe ambient operating conditions are allowed. (See Mechanical installation, Technical data:IEC data or NEMA data, Ambient conditions.)The unit is fixed properly into the cabinet. (See Planning the cabinet assembly andMechanical installation.)The cooling air will flow freely.The motor and the driven equipment are ready for start. (See Planning the electricalinstallation: Motor selection and compatibility, Technical data: Motor connection.)ELECTRICAL INSTALLATION (See Planning the electrical installation, Electrical installation.)Drive does not include the EMC filter option (+E202, +E200) or the +E202 and +E200 EMCfilter capacitors are disconnected if the drive is connected to an IT (ungrounded) system.The capacitors are reformed if stored over one year (refer to ACS600/800 CapacitorReforming Guide [3AFE64059629 (English)].The drive is grounded properly.The mains (input power) voltage matches the drive nominal input voltage.The mains (input power) connections at U1, V1 and W1 and their tightening torques are OK.Appropriate mains (input power) fuses and disconnector are installed.The motor connections at U2, V2 and W2 and their tightening torques are OK.The motor cable is routed away from other cables.There are no power factor compensation capacitors in the motor cable.The external control connections inside the drive are OK.There are no tools, foreign objects or dust from drilling inside the drive.Mains (input power) voltage cannot be applied to the output of the drive (with bypassconnection).Motor connection box and other covers are in place.Installation checklist