Design & Construction Specifications - Town of Kernersville

) Contact person and phone numberc) The reason they are being submittedFailure to identify the project and the reason it is being submitted willcause delay in the plan review process.2. For first time submittal of construction drawings, four (4) complete boundsets of prints are submitted to the Public Works Department. Prints arelogged in and distributed as follows:a) One (2) set to the Public Works Dept.-Engineering Division.b) One (1) set to the Public Works Director.c) One (1) set to the Construction Services Supervisor.3. Submit drawings to the City-County Utility Commission and otheragencies if requiring a plan review.4. The Public Works Department-Engineering Division and ConstructionServices Supervisor will review plans and return comments to theSubmitting Engineer.5. The Submitting Engineer will need to re-submit drawings until allcomments for "Roadway", "Drainage", "Water", and "Sewer" have beenaddressed.6. Once approved by all agencies involved, four (4) sets, (1- reproducibleand 3- blue lines), of approved drawings with all appropriate signaturesmust be submitted to the Engineering Division of Public Works. Printsare logged in, reviewed, stamped “Approved for Construction”, signedand distributed as follows:a) One (1) set of reproducible on file in the Engineering Division.b) One (1) set of blue-lines on file with the Public Works Director.c) One (1) set of blue lines for the Construction Services Manager.d) One (1) set of reproducible will be stamped and returned to theSubmitting Engineer.B. Construction Drawings "Approved for Construction":1. All approved drawings must have the following stamp of approval oneach sheet.