Installation and User's Guide - Services and Support

IBM ConfidentialThe fmtnum variable displays numbers using one of the following formats.Select the format number that corresponds to the format you want to use.1 n,nnn.dd. This is the default.2 n,nnn,dd.3 n nnn,dd4 n nnn.dd5 n.nnn,dd6 n’nnn,ddREMOTEDSMAgentnode=nodenameSpecify the node name of the machine that moves the VSS data to TivoliStorage Manager server storage during off-loaded backups.||||RETRies=numUse the RETRies positional parameter to specify the number of times thatData Protection for Exchange will retry a failed Legacy Backup. You canspecify a value of 0 through 32 in the num value. The default value is 4.TEMPLOGRESTorepath=path-nameUse the TEMPLOGRESTorepath positional parameter to specify the defaulttemporary path to use when restoring logs and patch files. For bestperformance, the path specified in the path-name should be on a differentphysical device than the current active logger. If the path-name variableincludes spaces, the entire TEMPLOGRESTorepath positional parameterentry must be placed in double quotes. For example:TEMPLOGRESTorepath="c:\Program Files\file.log"Note: Do not specify double-byte characters (DBCS) within the temporarylog path. This is not supported by Data Protection for Exchange orMicrosoft.TIMEformat=formatnumberUse the TIMEformat positional parameter to specify the format in whichyou want system time displayed.The formatnumber variable displays time in one of the following formats.Select the format number that corresponds to the format you want to use.1 HH:MM:SS This is the default.2 HH,MM,SS3 HH.MM.SS4 HH:MM:SSA/PSet optional parametersOptional parameters follow the set command and positional parameters./CONFIGfile=configfilenameUse the /configfile parameter to specify the name of the Data Protectionfor Exchange configuration file in which these values will be set.The configfilename variable can include a fully qualified path. If theconfigfilename variable does not include a path, the Data Protection forExchange installation directory is used.ConsiderationsChapter 5. Using the Command Line Interface 109