Installation and User's Guide - Services and Support

IBM ConfidentialOn the Tivoli Storage Manager serverYou must set up a scheduler service on the machine where the backup-archiveclient is installed before performing this procedure.1. Create a command file called c:\excfull.cmd. A sample command file(excfull.smp) is provided in the directory where Data Protection for Exchange isinstalled. This sample file contains commands necessary to perform ascheduled full Legacy backup of all Exchange Server storage groups to TivoliStorage Manager storage. You must specify COMPLETE PATHNAMES in thecommand file for all file names and non-system commands.Note: Perform the following if you are setting up the scheduler for anExchange Server running in a cluster environment:v Your command file must reside on the Exchange Server File Share. Theschedule you define on the Tivoli Storage Manager server needs to matchthis command file. In Step 1 and Step 2, the command file c:\excfull.cmdcould be x:\excfull.cmd where x is the Exchange Server File Share.v The tsmoptfile and logfile options specified in your command file mustreflect the location of the options file and log file on the Exchange Server FileShare.v The Exchange virtual server must be specified in the c:\excfull.cmd file. Usethe excserver option to specify the Exchange virtual server in the commandtext located at the end of the c:\excfull.cmd file:tdpexcc backup * full /tsmoptfile=dsm.opt /logfile=excsch.log/excserver=virtualservername>> excfull.logNote that this command text is divided on two lines to accommodate pageformatting.2. Enter the following command to define the schedule. You can enter thiscommand on the server console or from an administrative client. Theadministrative client does not have to be running on the same system as theTivoli Storage Manager server.def sched mydomain my_schedule desc="Exchange Daily Full LegacyBackup" action=command objects="c:\excfull.cmd" priority=2 starttime=21:00 duration=15 duru=minutes period=1 perunits=day dayofweek=anyNote that if there is a space in the directory specified for the object parameter,then the directory must be enclosed in two sets of quotes. For example:objects=””c:\Program Files\Tivoli\TSM\TDPEXchange\excfull.cmd"”Tivoli Storage Manager displays this message:ANR2500I Schedule MY_SCHEDULE defined in policy domain MYDOMAIN.3. Issue the following command to associate Data Protection for Exchange to thisschedule:define association mydomain my_schedule mynodeTivoli Storage Manager displays this message:ANR2510I Node MYNODE associated with schedule MY_SCHEDULE inpolicy domain MYDOMAIN.A schedule is now defined on the Tivoli Storage Manager server with thefollowing attributes:v It runs a command file called c:\excfull.cmd.v It begins at 9:00 pm.v It is performed daily and can start on any day of the week.116 Storage Manager for Mail 5.5: Data Protection for Microsoft Exchange Server Installation and User’s Guide