Installation and User's Guide - Services and Support

IBM ConfidentialLog File Name (default value: tdpexc.log)Enter the name of the file into which you want Data Protectionfor Exchange to write activity log information.Prune Old Entries (default value: selected)Check this box to enable pruning of the activity log. Specify thenumber of days (0 to 9999) to keep old entries. Data Protectionfor Exchange prunes entries greater than this number when youinitialize this application. The default value is to keep the entriesfor 60 days. Click on the Prune Now button to prune the activitylog immediately.v Regional TabLanguage (default value: American English)Specify the language to use for displaying the GUI and DataProtection for Exchange messages. The following languages areavailable during installation:– English (United States) (This is the default).– Brazilian Portuguese– Chinese (Simplified)– Chinese (Traditional)– French– German– Italian– Japanese– Korean– SpanishThe language you specify does not become effective until youexit and restart the GUI.Date Format (default value: mm/dd/yyyy)Specify the date format of your choice.– dd Day of the Month– mm Month of the Year– yyyy YearTime Format (default value: hh:mm:ss)Specify the format for displaying time.– hh Hours (24-hour day)– mm Minutes in an hour– ss Seconds in a minuteNumber Format (default value: xxx,xxx.dd)Specify the format for displaying numbers. The choices on thedisplay represent several ways to place the decimal, comma, andspaces.v VSS Backup TabDefault Backup Destination (default value: TSM Server)Select the default storage location for your backups. You canselect from the following storage locations:Chapter 4. Using the Graphical User Interface (GUI) 51