Daelim S4 50cc Service Manual - Mojo

CYLINDER HEAD / VALVES● Apply engine oil to the camshaft and install it on thecylinder head with the cam thread facingdownward.● Assembly the cam chain and cam sprocket aftermatching the cam sprocket timing mark in parallelwith the top pf the cylinder head.● Slowly rotate the crankshaft counterclockwise andalign the “T” mark of the flywheel with the indexmark of the RH. crank case cover.TMARKCAUTION•Take precautions not to allow the cam chain tocome off the camshaft tinning gear while turningthe camshaft.● Install the dowel pins on the cylinder head.● Assemble cam shaft holder.WASHER● Assemble washer to cam shaft holder.CAUTION•The hole of the camshaft holder and the fittingsection of rocker arm shaft fit section must be inalignment.