Daelim S4 50cc Service Manual - Mojo

15. IGNITION SYSTEMSERVICE INFORMATION····15-1TROUBLE SHOOTING····15-2CDI UNIT INSPECTION····15-3PULSE GENERATOR INSPECTION·15-3IGNITION COIL INSPECTION·· 15-4SERVICE INFORMATIONGENERAL SAFETY● Follow the steps described in the troubleshooting flow chart when servicing the igntion system● The CDI unit may be damaged, if dropped● If the connector is disconnected when the current is flowing, the execessive voltage may damage the unit● Always turn off the ignition switch before servicing● The CDI unit use an electrically controlled ignition timing system. No adjustments can be made to the ignitiontiming.● Use spark plug of the correct heat range. Using spark plug with an incorrect heat range can damage the engine.● Connect the same color cords. Pay particular attention to colors prior to removing wiring. Connect the same colorcouplers.● A faulty iginition system is often related to poorly connected connectors. Check those connections before proceeding● This manual gives explanations on inspections to receive peak voltage. As inspections for coil resistance values arealso included, it may be difficult to make a correct determination● Conduct inspection on the main switch by referring to the wiring system continuity chart. (⇨19-1 )GENERAL SAFETYIGNITION COILRESISTANCEVALUE ITEMPRIMARY COILSECONDARY COILWITH PLUG CAPWITHOUT PLUG CAPSTANDARD VALUEPULSE GENERATOR COIL RESISTANCE VALUE SPARK PLUGSPARK PLUG GAPTOOLMULTI TESTERPVA MULTI-TESTER