Daelim S4 50cc Service Manual - Mojo

BELT TYPE CONTINUOUSLY VARIABLE TRANSMISSION / KICK STARTERLH. CRANK CASE COVERREMOVAL● Loosen 10 flange bolts assemble at LH. Side cover.KICK STARTER ARMDOWEL PIN● Disassemble LH. Side cover.● Disassemble gasket and dowel pin.GASKET● Inspect LH. crank case cover.● Install the new gasket and dowel pin after removingthe gasket of crankcase surface.● Install in the reverse order of removal..NOTE·When not knowing the length of bolt, arrangeassembled positions regularly before assembling it,then assemble it.·When assembling bolts, assemble them diagonallybased on standard specification assembly torques.KICK RETURN SPRINGKICK DRIVEN GEARKICK STARTERDISASSEMBLE● Disassemble LH. Side cover.● Disassemble fixed flange bolt of kick starter arm.● Disassemble kick starter arm.● Disassemble external circlip 14mm.● Disassemble kick starter spindle washer.● Disassemble kick starter spindle.● Disassemble kick starter spindle spring.● Disassemble kick starter spindle bush.KICK STARTER SPINDLE