Daelim S4 50cc Service Manual - Mojo

BELT TYPE CONTINUOUSLY VARIABLE TRANSMISSION / KICK STARTERCOGWIDTHINSPECTION● Check the drive belt for cracks, cog seperation andwear ; Replace as necessary.● Measure the width of the drive belt replace thebelt if the service limit is exceeded.SERVICE LIMIT : 16.5mmNOTE·Use only a genuine DAELIM replacement drivebelt.·Do not get oil or greasde on the drive belt or pulleyside.·Clean off any grease or oil before reinstalling.DRIVEN PULLEY SUB ASSYINSTALLATION● Like left pucture, turn the pulley clockwise andspread the faces apart while installing the drive belt.NOTE·Hold the pulley faces apart preventing them fromclosing.● Hang on drive belt assembled at driven pulley subass’y.● Between drive face and movable drive face, thenassemble it to drive shaft in reverse side.DRIVEN PULLEY SUB ASSY● Assemble clutch outer to driven pulley sub ass’y.● Temporarily install flange nut 10mm to driven pulley,tighten the nut to the specified torque.TORQUE : 4.OkgfmTOOL : UNIVERSAL HOLDER