Daelim S4 50cc Service Manual - Mojo

6. ENGINE REMOVAL/INSPECTIONSERVICE INFORMATION····· 6-1ENGINE REMOVAL/ASSEMBLY·· 6-2SERVICE INFORMATIONGENERAL SAFETYNOTE•Use a jack to remove or install the engine. Support the motorcycle with a jack firmly, taking precautions not todamage the frame, engine, cable or harness.•Attach tape to the frame to protect it during the engine removal or installation.● The following works can be carried out without removing the engine from the vehicle body.-TRANSMISSION (⇨SECTION 11)-A.C. GENERATOR (⇨SECTION 8)-KICK STARTER/ CONTINUOUSLY VARIABLE TRANSMISSION (⇨SECTION 7)-STATOR MOTOR (⇨SECTION 16)-CARBURETOR (⇨SECTION 5)-EX. MUFFLER (⇨SECTION 3)● Items to be worked after removing engine.-CYLINDER HEAD, CYLINDER, CRANK SHAFT, CRANK SHAFT BEARING● Engine oil capacity : 0.85L(when disassembling)TORQUE VALUESENGINE HANGER BOLT : 4.5kgf·m