Daelim S4 50cc Service Manual - Mojo

CYLINDER HEAD / VALVES● Install flange nut and tighten them driving with 2-3times.TORQUE : 2.0kgf·mPUSHSPRINGBOLT● Pull out spring from cam chain tensioner lifter.● Push the tensioner shaft clockwise with a smalldriver like the right picture, and insert the shaft intothe body completely.● Assemble new gasket to tensioner lifter andtensioner lift to cylinder.● Assemble flange bolt● Insert tensioner lift spring and assemble with bolt.TORQUE : 1.1kgf·mTENSIONER LIFTFEELER GAUGE● Fill the clean engine oil into the operating parts ofthe cylinder head.● Adjust the valve clearance.ROCKER ARMTAPPET WRENCH● Remove oil from the cylinder head cover groovesand accurately assemble the gasket to the cover.● Install the cylinder head cover bolts.TORQUE : 1.1kgf·m● Install the shroud comp.● Install the engine frame.