Daelim S4 50cc Service Manual - Mojo

STARTING SYSTEMSTARTER MAGNETIC SWITCHSTARTER MAGNETIC SWITCHREMOVAL● Remove the luggage box.● Remove the battery (+) cable from the startermagnetic switch terminal.● Remove the starter motor cable from the startermagnetic switch terminal.● Disconnect the coupler connected to wire harness,and starter magnetic switch.INSPECTION● Check if the starter magnetic switch “click” when itis turened ON.- Click but the engine does not start. Poorly connected battery terminal and motorterminal of the switch. (Check the startermagnetic switch)- No click No starter magnetic switch inputvoltage. (Faulty relay ground line and startermagnetic switch)STARTER MAGNETIC SWITCHVOLTAGE● Measure the voltage between the yellow / red wire(+) and ground at the starter magnetic switchconnector.● If battery voltage appears only when the starterswitch is pressed, it is normal.● Check the resistance between terminals of startermagnetic switch.OPERATION CHECK● Disconnect the magnetic switch wire connector.● Apply battery voltage between trminals, when theyellow / Red wire is connected to the positive (+)battery terminal and the yellow / Green wire to thenegative (-) battery terminal. If there is continuitybetween battery and motor terminal, it is normal.● Install in the reverse order of removal.