Daelim S4 50cc Service Manual - Mojo

SERVICE INFORMATIONCAUTION WHEN WIRING•Each cord must be connected depending on its color.When connecting different cord, attach color tubearound the connector. Connect the coupler to theconnector with same color and same pin number.•Identify the two-colored cord by main color first andthen spriped color .•When measuring voltage or resistance of the cordterminal using tester, contact the tester plug behind ofthe coupler. Pay attention not to open the cord terminaland contact the tester plug from the front of the couplerin case of water-proof coupler.•Recheck the condition of contact, securing andcontinuity of each part after maintenance.•When connecting the battery, the plus terminal must beconnected first.•After connecting the terminal, apply the grease to theterminal.•When disconnecting the battery, the minus terminalmust be disconnected first.•Make sure that the tool such as spanner do not contactwith the frame.•Connect covers to the terminal after maintenance.•If the fuse is short-circuited, find out the cause andrepair. Replace with the fuse having the specifiedcapacity.•If there is rust in the terminal, remove the rust with sandpaper prior to connecting.VALIDATIONOF CAPACITY!REMOVETHERUST!