Daelim S4 50cc Service Manual - Mojo

A.C. GENERATOR /RH. CRANK CASE COVER● Loosen the flange nit securing the fly wheel andremove the flywheel using the A.C.G. rotor puller.ACG ROTOR PULLERHEX BOLTACGCAUTION•The flywheel may easily remove if you rotate thepuller while tapping the roller shaft metal hammer.•Always use a holder and a puller to remove theflywheel. Do not try to remove the flywheel byhammering directly on it. The crank shaft orcomponents could be damaged.•After disassembling fly wheel, check whetherwoodruff key damaged or not.FLANGE BOLTTOOL: A.C.G ROTOR PULLERUNIVERSAL HOLDERDRIVE FACE HOLDER● Loosen the 2 flange bolts securing stator andremove the stator.● Loosen the 2 bolts securing the pulse generator andremove it.DISASSEMBLE● ACG wire coupler and connecter connected withwire harness.ASSEMBLY● Assemble ACG stator to RH. crank case cover.● Clean crank shaft taper side.● Clean the inside of fly wheel.● Check woodruff key, assemble the home of fly wheelto woodruff key.