Daelim S4 50cc Service Manual - Mojo

FRONT WHEEL / FRONT BRAKE / FRONT FORK / STEERING STEMHANDLE BAR● Disconnect the throttle cable from the throttle gripand remove the throttle grip.● Loosen the hex flange bolt securing handle bar andremove the handle bar.FRANGE BOLTHANDLE BARINSTALLATION● Install the handle bar to the steering stem.● Assemble handle bar bushing(setting collar) fit to thehome.● Insert the hex flange bolt and tighten the locknut..TORQUE VALUE : 4.5kgf·mHANDLE BAR BUSHING● Apply the grease to the throttle cable and install thethrottle bracket.● Install the front brake master cylinder.● Install the LH. handle bracket.LH. HANDLE BRACKETRH. HANDLE BRACKETNOTE•Adjust the throttle grip free play to 2-6mm.● Install in the reverse order of removal.FRONT WHEELREMOVAL● Support the vehicle securely under the engine toraise the front wheel.● Remove the speedometer cable.● Loosen the axle nut and remove the wheel.FRONT WHEEL