G4 Multi Channel Weighing Instrument. PM/DT/HE Technical Manual

G4 Multi Channel Weighing InstrumentByte 1:Used to define the number of registers to write.Bytes 2 and 3:Define from which register number to read or write.Bytes 4 to 15:Contains the data when writing to the instrument.Data to the fieldbus (Inputs in the master)GeneralData to the fieldbus are divided into two categories, one is the mandatory “base block”which contain general data and the 12 modbus register used for reading from theinstrument. The second part is the up to twelve configurable data blocks.Byte Contents Byte Contents00 Instrument error MSB 16 Read register 5 MSB01 Instrument error 17 Read register 502 Instrument Status MSB 18 Read register 6 MSB03 Instrument Status 19 Read register 604 Command acknowledge 20 Read register 7 MSB05 Command error 21 Read register 706 Start address, Read MSB 22 Read register 8 MSB07 Start address, Read 23 Read register 808 Read register 1 MSB 24 Read register 9 MSB09 Read register 1 25 Read register 910 Read register 2 MSB 26 Read register 10 MSB11 Read register 2 27 Read register 1012 Read register 3 MSB 28 Read register 11 MSB13 Read register 3 29 Read register 1114 Read register 4 MSB 30 Read register 12 MSB15 Read register 4 31 Read register 126-31