G4 Multi Channel Weighing Instrument. PM/DT/HE Technical Manual

Technical ManualRange/AlternativesExplanation andresult of alternatives.Slot 4, ch 2 Scale noThis parameter defines which scale (1 – 8) thatchannel 2 in slot 4 will be connected to. Each scale mayonly be assigned once.Note: this parameter is only shown if ‘Slot 4 Module type’is set to ‘WFIN2’ or ‘HSWF2’Slot 5 Module Type< No module > This parameter defines what type of I/O- module isinstalled in slot 5. See ‘Slot 1 Module type’ for details onparameter values.Slot 5, ch 1 Scale noSlot 5, ch 2 Scale noThis parameter defines which scale (1 – 8) thatchannel 1 in slot 5 will be connected to. Each scale mayonly be assigned once.Note: this parameter is only shown if ‘Slot 5 Module type’is set to ‘WFIN’, ‘WFIN2’ or ‘HSWF2’.This parameter defines which scale (1 – 8) thatchannel 2 in slot 5 will be connected to. Each scale mayonly be assigned once.Note: this parameter is only shown if ‘Slot 5 Module type’is set to ‘WFIN2’ or ‘HSWF2’.Slot 6 Module Type< No module > This parameter defines what type of I/O- module isinstalled in slot 6. See ‘Slot 1 Module type’ for details onparameter values.Slot 6, ch 1 Scale noSlot 6, ch 2 Scale noThis parameter defines which scale (1 – 8) thatchannel 1 in slot 6 will be connected to. Each scale mayonly be assigned once.Note: this parameter is only shown if ‘Slot 6 Module type’is set to ‘WFIN’, ‘WFIN2‘ or ‘HSWF2’.This parameter defines which scale (1 – 8) thatchannel 2 in slot 6 will be connected to. Each scale mayonly be assigned once.Note: this parameter is only shown if ‘Slot 6 Module type’is set to ‘WFIN2’ or ‘HSWF2’.3-14