G4 Multi Channel Weighing Instrument. PM/DT/HE Technical Manual

G4 Multi Channel Weighing Instrument2006-09-24 19:07Scale: 1Gross Zero102.1 kgScale: 2Net Zero 000.0 kgScale: 3Net Zero 000.0 kgScale: 4Gross004.9 kg------ ------ P.Tare Levels ------Four scales operating display mode.Using the right/left arrow keys will scroll through the three different operating displaymodes unless limitations are set with parameter ‘Display modes’.To scroll between the available scales the up/down arrows on the instrument frontpanel are used.From the operating display it is possible to directly reach functions related to individualscales by pressing one of the soft function keys on the touch display.These functions are:P. Tare: Showing and setting the (manual) preset tare for the selected scale.Levels: Setting the level of the level supervisors for the selected scale. Note that theparameters for the level supervisors, such as scale, source, hystereses range, and soon are accessed through the ‘Parameter Set-up’ menu.If the operator lock is on the user is required to enter the operator lock code before anychanges of ‘P. Tare’ or ‘Levels’ values can be made.ShortcutsFollowing commands will take you directly to wanted scale indication.- Enter Takes you directly to Single scale window with selectedscale active- Entry of digit 1-8 Selection of scale no. corresponding to the digit.5-3