G4 Multi Channel Weighing Instrument. PM/DT/HE Technical Manual

Technical ManualRange/Alternatives1:CapacityRange:0.5 to 999999Unit:Measurem. unitExplanation andresult of alternatives.Nominal range of scale.Capacity / Resolution = Number of divisions.1:HSWF Update Rate12.5 Hz25 Hz50 Hz100 Hz200 Hz400 Hz800 Hz1:WFIN Update Rate2.3 Hz4.6 Hz9.3 Hz19 Hz37 Hz75 Hz150 Hz300 HzDefines the update rate for the measuring channelbelonging to scale 1 if the weight conversion module isof HS WF 2 type.Note: this parameter is only shown if the weightconversion module belonging to scale 1 is of HS WF2type.Defines the update rate for the measuring channelbelonging to scale 1 if the weight conversion module isof WF IN or WF IN2 type.Note: this parameter is only shown if the weightconversion module belonging to scale 1 is of WF IN orWF IN2 type.1:Filter WindowRange:0 to 999999Unit:Measurem. unitThe instrument produces unfiltered and filtered weightinternally. If the difference between the filtered anunfiltered weight is less than ‘Filter window’ the filteredweight is used.This parameter value has one decimal more thanparameter Resolution, to allow ‘Filter window’ to besmaller than the resolution.1:Motion Detect WindowRange:0 to 999999Unit:Measurem. unitMotion status is ‘on’ when the weight value is not stable.It goes off when the weight has been stable for the‘No motion delay time’. Motion condition exists if theweight change during a certain measuring period isgreater than the window ‘Motion Detect Window’. Themeasuring period is one conversion time (Update Rate)or at least 200 ms. This parameter value has onedecimal more than parameter Resolution, to allow‘Motion detect w.’ to be smaller than the resolution.3-16