G4 Multi Channel Weighing Instrument. PM/DT/HE Technical Manual

G4 Multi Channel Weighing InstrumentRange/Alternatives1:No Motion DelayRange:0 to 10.0Unit: s1:Motion CheckOffOn1:Overload CheckOffUnipolarBipolar1:Overload LimitRange:0.5 to 999999Unit:Measurem. unitExplanation andresult of alternatives.Delay in seconds from detection of stable weightuntil the Motion status goes off.Off: Only zero adjustment is inhibited during motion.On: Inhibits zero adjustment, taring, and printing duringmotion.Check of overload is performed according to this set-up.Off: No check is performed. Weight will be reportedup to the limits of the AD converter.Unipolar: Overload status will be set if ‘Overload limit’ isexceeded. Underload status will be set if the grossweight is below minus (-)9 * Resolution.Bipolar: Overload status will be set if Overload limitis exceeded.Underload status will be set if the gross weight is belowminus (-) Overload limit.Should be set to the max gross weight that the weightindicator is allowed to report. This parameter is alwaysset to default value when changing Resolution orCapacity. If ‘Bipolar’ overload check is selected theweight will be reported up to the Overload limit and downto the minus (-) Overload limit.Note: this parameter is only shown if parameter‘1: Overload Check’ is set to ‘Unipolar’ or ‘Bipolar’.3-17