G4 Multi Channel Weighing Instrument. PM/DT/HE Technical Manual

Technical ManualRange/Alternatives Explanation and result of alternatives.Menu ‘Hardware config.’FieldbusNot In UseProfibusDeviceNetThis parameter defines what type of fieldbus that will beused in the CPU.Not In Use: The fieldbus is not used regardless of anyinstalled module.Profibus: A Profibus type of fieldbus module is used.DeviceNet: A DeviceNet type of fieldbus module isused.Slot 1 Module TypeNo moduleHSWF2WFINWFIN2AOUT1AOUT4DIO8Slot 1, ch 1 Scale noNot in use12345678This parameter defines what type of I/O-module that willbe used in slot 1.No module: No module is used in this slot.HSWF2: A 2 channel high speed weight/force module.WFIN: A 1 channel, weight/force measuring module.WFIN2: A 2 channel, weight/force measuring module.AOUT1: A 1 channel analog output module.AOUT4: A 4 channel analog output module.DIO8: A 8/8 digital input/output module.This parameter defines which scale (1 – 8) thatchannel 1 in slot 1 will be connected to. Each scale mayonly be assigned once.1: This slot and channel is assigned to scale no 1.2: This slot and channel is assigned to scale no 2.….8: This slot and channel is assigned to scale no 8.Not in use: This slot and channel is not assigned to anyscale.Note: this parameter is only shown if ‘Slot 1 Module type’is set to ‘WFIN’, ‘WFIN2’ or ‘HSWF2’.Slot 1, ch 2 Scale no This parameter defines which scale (1 – 8) thatchannel 2 in slot 1 will be connected to. Each scale mayonly be assigned once.Note: this parameter is only shown if ‘Slot 1 Module type’is set to ‘WFIN2’ or ‘HSWF2’.3-12