G4 Multi Channel Weighing Instrument. PM/DT/HE Technical Manual

Technical ManualMain menuTo reach the main menu, press the ‘Info’ button on the instrument front panel.Navigating in a menu is done with arrow keys or by tapping on the display on specificchoices e.g. ‘Parameter set-up’.To open a sub menu, e.g.Parameter set-up, select thesub menu with arrow keysfollowed by pressing the‘Enter key’, or by tapping onthe name.Main MenuLevelsSetpointsPreset TaresClock Set-upParameter Set-upSystem InformationMaintenanceNetwork ConfigurationEnterEscapeMain menu.The instrument Main menu can be opened without interrupting the weighing operation.In the Main menu it is possible to select between the following sub menus:Levels: Viewing and editing of level value for each configured Level Supervisionfunction. Note that configuration of Level Supervision functionality is done in the‘Parameter Set-up’ menu.Setpoints: Viewing of configured setpoint values. Editing of setpoint value is notpossible. Note that configuration of setpoint functionality is done in the ‘Parameter Setup’menu.Preset Tares: Viewing and editing of preset tares values for scales with tare correctionmode set to Preset or Auto + Preset. Set-up of Scale ‘Tare Corr. Mode’ parameter isdone in the ‘Parameter Set-up’ menu.Clock Set-up: Used to set the instrument clock and date. Time and Date formats areset-up with parameters trough ‘Parameter set-up’ menu.Parameter Set-up: Access to the G4 instrument parameter set-up menu system. Seechapter 3 Set-up for more details on setup.System Information: Displaying system information for hardware and software in theinstrument. Program versions, database version, serial numbers and software versionsfor all electronic modules can be read here. Info about the Ethernet connection is alsoavailable.5-8