G4 Multi Channel Weighing Instrument. PM/DT/HE Technical Manual

G4 Multi Channel Weighing InstrumentRange/Alternatives1:Rated Output 1Range:0 to 9.99999Unit: mV/V1:Rated Output 2Range:0 to 9.99999Unit: mV/V1:Rated Output 3Range:0 to 9.99999Unit: mV/V1:Rated Output 4Range:0 to 9.99999Unit: mV/V1:Set ZeroRange: +/–999999Unit:Measurem. unit1:Zero OffsetRange: +/–999999Unit:Measurem. unitExplanation andresult of alternatives.Defines the rated output signal for transducer 1.The value is specified in the transducer data sheetfor transducer 1.If the total number of transducers and fixed supports isover 4: add up all rated output values, divide bythe number of transducers, and enter the result here!Defines the rated output signal for transducer 2.The value is specified in the transducer data sheet fortransducer 2.Defines the rated output signal for transducer 3.The value is specified in the transducer data sheet fortransducer 3.Defines the rated output signal for transducer 4.The value is specified in the transducer data sheet fortransducer 4.Live weight is displayed at the bottom of the screen.Enter wanted value for the actual load, usually ‘0’, i.e.unloaded scale.NOTE! This parameter should be used forzeroing of the instrument.This menu shows the offset value acquired by zeroing in‘Set zero’. If this parameter is edited,the zeroing will be influenced.3-21