G4 Multi Channel Weighing Instrument. PM/DT/HE Technical Manual

G4 Multi Channel Weighing InstrumentRange/AlternativesData Block 1 Scale12345678< 1 >Data Block 2 TypeExplanation andresult of alternatives.Selects the source scale for Data Block 1.1: The Data Block uses data from scale no 1.2: The Data Block uses data from scale no 2.….8: The Data Block uses data from scale no 8.Note: This parameter is only shown if parameter‘No Of Data Blocks‘ is set to 1 or greater and parameter ‘DataBlock 1 Type‘ is set to ‘Gross Weight’, ‘Net Weight’, ‘Disp.Weight’, ‘Flow Rate’ or ‘Input Signal’.Sets the data source for Data Block 2.Note: This parameter is only shown if parameter‘No Of Data Blocks‘ is set to 2 or greater.See ‘Data Block 1 Type‘ for an explanation of the parameter.Data Block 2 FormatSets the Data Block 2 Format.Note: This parameter is only shown if parameter‘No Of Data Blocks‘ is set to 2 or greater.See ‘Data Block 1 Format‘ for an explanation of the parameter.Data Block 2 ScaleSelects the source scale for Data Block 2.Note: This parameter is only shown if parameter‘No Of Data Blocks‘ is set to 2 or greater.See ‘Data Block 1 Scale‘ for an explanation of the parameter.For explanation on parameters for Data Blocks 3 to 12 see ‘Data Block 1 Type‘,‘Data Block 1 Format‘ and ‘Data Block 1 Scale‘. Note that the parameters are shownonly if ‘No Of Data Blocks‘ is set equal to or greater than the Data Block number.3-31