Installing CA Enterprise Log Manager - CA Technologies

Edit Global ConfigurationsThe System Status access panel provides you with tools to affect a CA EnterpriseLog Manager server and its services, and to gather information for Support.Additional information about this area is available in the Administration Guideand online help.Edit Global ConfigurationsYou can set global configurations for all services. If you attempt to save valuesoutside the allowed range, CA Enterprise Log Manager defaults to the minimumor maximum as appropriate. Several of the settings are interdependent.To edit global settings1. Click the Administration tab and the Services subtab.The Service List appears.2. Click Global Configuration in the Service List.The Global Service Configuration details pane opens.3. Change any of the following configuration settings:Update IntervalSpecifies the frequency, in seconds, at which server components applyconfiguration updates.Minimum: 30Maximum: 86400Session TimeoutSpecifies the maximum length of an inactive session. If auto-refresh isenabled, a session never times out.Minimum: 10Maximum: 60Allow Auto RefreshLets users auto-refresh reports or queries. This setting letsadministrators globally disable auto-refresh.Auto Refresh FrequencySpecifies the interval, in minutes, at which the report views refresh. Thissetting depends on the selection of Allow Auto Refresh.Minimum: 1Maximum: 600Enable Auto RefreshSets auto-refresh in all sessions. Auto-refresh is not enabled, by default.112 Implementation Guide