Installing CA Enterprise Log Manager - CA Technologies

Copy the Certificate to the CA IT PAM Server6. List the directory contents and verify that the itpamcert.p12 is present.7. Remove the CA IT PAM configuration XML file. This is recommended forsecurity reasons.rm ITPAM_eem.xmlCopy the Certificate to the CA IT PAM ServerWhen you ran the safex command from CA Enterprise Log Manager to register CAIT PAM with its CA EEM, this process generated the itpamcert.p12 certificate. Youmust copy this certificate to the Windows server where you plan to install the CAIT PAM domain. During CA IT PAM domain installation, you browse for thiscertificate file.To copy the itpamcert.p12 from the CA Enterprise Log Managerappliance to the target Windows serverCopy the itpamcert.p12 file from the CA Enterprise Log Manager appliance thatincludes CA EEM to the host where you plan to install CA IT PAM.■Source file on the management CA Enterprise Log Manager server:/opt/CA/SharedComponents/iTechnology/itpamcert.p12■Destination path on target Windows server:C:\Program Files\CA\SharedComponents\iTechnology\Note: You can copy this file to the path of your choice. You select this filefrom its location when you install the CA IT PAM domain.Set Passwords for the Predefined CA IT PAM User AccountsExecution of the safex command creates the following:■IT PAM security groups:– ITPAMAdmins– ITPAMUsers■IT PAM users– itpamadmin with a default password– itpamuser with a default passwordYou must reset the password for the two predefined IT PAM users.Appendix C: CA IT PAM Considerations 223