Installing CA Enterprise Log Manager - CA Technologies

Installing a CA Enterprise Log Manager ServerCA Enterprise Log ManagerInformationValueCommentsSelect a device device name Select the name of the networkadapter to use for event logcollections and communications.Press the space bar to enter theconfiguration for the device.IP Address, Subnet Mask, andDefault Gatewayrelevant IP valuesEnter a valid IP address for thisserver.Enter a valid subnet mask anddefault gateway for use with thisserver.Domain name your domain name Enter the fully-qualified domainname in which this serveroperates, for example,mycompany.com.Note: The domain name must beregistered with the Domain NameServer (DNS) server in yournetwork to enable resolution of thehostname to IP address.List of DNS serversrelevant IPv4 or IPv6addressesEnter one or more DNS server IPaddresses in use in your network.The list is comma-separated withno spaces between entries.If your DNS servers use IPv6addressing, enter these addressesin that format.System Date and Time local date and time Enter a new system date and timeif needed.Update Time through NTP?NTP Server Name or AddressYes (recommended)or Norelevant hostname or IPaddressIndicate whether you want toconfigure the CA Enterprise LogManager server to update its dateand time from an establishedNetwork Time Protocol (NTP)server.Note: Time synchronization helpsensure alerts contain completedata.Enter the host name or the valid IPaddress of the NTP server fromwhich this CA Enterprise LogManager server gets date and time68 Implementation Guide