Installing CA Enterprise Log Manager - CA Technologies

Installation TroubleshootingThe following is a complete, sample JDBC URL:jdbc:ca-elm://127.0.0.1:17002;encrypted=1;ServerDataSource=Default;CustomProperties=(querytimeout=600;queryfederated=true;queryfetchrows=1000;offsetmins=0;suppressNoncriticalErrors=false)The following descriptions explain the URL components:jdbc.ca-elm:Defines the protocol:subprotocol string that designates the JDBC driverprovided with CA Enterprise Log Manager.//IP Address:Port;Names the IP address that represents the CA Enterprise Log Manager serverwhose data you want to access. The port number is the port to use for thecommunications, and must match the setting in the CA Enterprise LogManager ODBC Service configuration panel. If the ports do not match, theconnection attempt fails.encrypted=0|1;Determines whether SSL encryption is used for the communications betweenthe JDBC client and the CA Enterprise Log Manager server. The default valueis 0, not encrypted, and does not require specification in the URL. Settingencrypted=1 turns encryption on. Set the connection to encryption explicitly.In addition, this setting must match what you configure in the CA EnterpriseLog Manager ODBC Service dialog or the connection attempt fails.ServerDataSource=DefaultSpecifies the name of the data source. Set this value to Default for access tothe CA Enterprise Log Manager event log store.CustomProperties=(x;y;z)These properties are the same as the ODBC custom properties. If you do notspecify them explicitly, the default values shown in the example URL apply.More informationODBC Data Source Considerations (see page 84)Installation TroubleshootingYou can review the following installation log files to begin troubleshooting yourinstallation:ProductCA Enterprise LogManagerLog File Location/tmp/pre-install_ca-elm.log/tmp/install_ca-elm..logChapter 3: Installing CA Enterprise Log Manager 89