Network Force/Torque Sensor System
Net F/T Manual - ATI Industrial Automation
Net F/T Manual - ATI Industrial Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Net F/T Installation and Operation Manual<br />
Document: 9620-05-net ft-11<br />
4.3 Snapshot Page (rundata.htm)<br />
This page allows you to view the current transducer loading, the maximum and minimum peaks (if peak<br />
monitoring is enabled on the Settings page), and the status of thresholding conditions.<br />
The information displayed on this page is static and does not update after the page is loaded. To see<br />
current information the page must be reloaded.<br />
Figure 4.3—Snapshot Page<br />
Transducer Loading Snapshot (User Units):<br />
<strong>Force</strong>/<strong>Torque</strong> Data:<br />
Displays the force and torque data scaled in the user units selected in the<br />
Configurations page. If any strain gages are saturated, these values will be<br />
invalid and displayed in red with a line through them.<br />
Minimum Peaks:<br />
Displays the minimum peak values captured scaled in the user units selected<br />
in the Configurations page.<br />
Maximum Peaks:<br />
Transducer Loading Snapshot (Counts):<br />
<strong>Force</strong>/<strong>Torque</strong> Data:<br />
Displays the maximum peak values captured scaled in the user units selected<br />
in the Configurations page.<br />
Displays the force and torque data scaled with the Counts per <strong>Force</strong> and<br />
Counts per <strong>Torque</strong> displayed in the Configurations page. If any strain gages<br />
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati-ia.com • Email: info@ati-ia.com<br />
B - 31