emerson-300510en-users-manual

Recommendations

Info

Rosemount Raptor System Configuration Manual 300510EN, Rev AA December 2010 5.8.7 2230 Graphical Field Display This section gives a brief description of how to configure a Rosemount 2230 Graphical Field Display. All fields in the 2230 Graphical Field Display tab are disabled if no graphical field display is associated with the current tank. The Configure Tank Display 2 and Configure Tank Display 3 buttons are disabled if only one Rosemount 2230 is mapped to the current tank database position of the Rosemount 2410 Tank Hub. To configure the 2230 Graphical Field Display, do the following: 1. In the 22xx ATD window, select the 2230 Graphical Field Display tab: 2. From the drop-down lists in the Units for Display pane, choose the desired measurement units to be used by the Rosemount 2230 for the various tank measurement variables. 3. In the Display Tanks box, choose the tanks to present in the Rosemount 2230 display by selecting the appropriate check boxes. 4. In the Display Tank Parameters pane, choose the parameters to be displayed for each tank by selecting the appropriate check boxes. 5. Enter the toggle time for the displayed tank parameters in the Display Toggle Time input field. The selected parameters will be displayed for one tank at a time starting with Tank 1. 5-76 Section 5. Installing a Raptor Level Gauging System
System Configuration Manual 300510EN, Rev AA December 2010 Rosemount Raptor 6. If a second graphical field display is used, click the Configure Tank Display No 2 button and repeat step 1 through 4 above. 7. If a third graphical field display is used, click the Configure Tank Display No 3 button and repeat step 1 through 4 above. 8. Click the Apply button to store the configuration, or click the OK button to store the configuration and close the window. See the Rosemount 2230 Graphical Field Display Reference Manual (Document No. 300560EN) for more information on how to configure a Rosemount 2230 Graphical Field Display. Section 5. Installing a Raptor Level Gauging System 5-77
Page 1:
System Configuration Manual 300510E
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62: System Configuration Manual 300510E
Page 111: System Configuration Manual 300510E
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 246:
show all

emerson-300510en-users-manual

Create successful ePaper yourself

Delete template?

Save as template?