emerson-300510en-users-manual
Emerson Tank Gauging System
Emerson Tank Gauging System
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Rosemount Raptor<br />
System Configuration Manual<br />
300510EN, Rev AA<br />
December 2010<br />
5.12 ADDING A TANK TO A RAPTOR SYSTEM<br />
Figure 5-12. A new tank and<br />
2410 Tank Hub are added to the<br />
workspace<br />
New tanks can easily be added to a Raptor system. The procedure will be<br />
slightly different depending on the specific system configuration. It can be<br />
summarized as follows:<br />
Option 1. Installing a new Rosemount 2410 Tank Hub and a new tank.<br />
1. Configure the communication settings of the 2160 Field Communication<br />
Unit (FCU).<br />
2. Update the 2160 FCU Slave Database by adding the field devices to be<br />
associated with the new tank.<br />
3. Install the new Rosemount 2410 Tank Hub and configure the Tank<br />
Database by mapping the field devices to the new tank.<br />
4. Configure the new field devices added to the 2410 tank database<br />
(Rosemount 5900S, Rosemount 2240S, Rosemount 3051S etc.).<br />
5. Configure the new tank.<br />
Figure 5-13. A new tank is<br />
added to an existing 2410<br />
tank hub<br />
Option 2. Adding a new tank to an existing Rosemount 2410 Tank Hub.<br />
1. Update the 2160 FCU Slave Database by adding the field devices<br />
installed on the new tank.<br />
2. Update the tank database of the existing Rosemount 2410 Tank Hub by<br />
mapping the new field devices to the new tank.<br />
3. Configure the field devices added to the 2410 tank database.<br />
4. Configure the new tank.<br />
Detailed descriptions of the two procedures outlined above are provided in<br />
sections “Adding a New Tank and a New 2410 Tank Hub” on page 5-115 and<br />
“Adding a New Tank to an Existing 2410 Tank Hub” on page 5-117.<br />
5-114 Section 5. Installing a Raptor Level Gauging System
Change language