emerson-300510en-users-manual

System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
Section 6
Device Handling
6.1 To Change Device Configuration . . . . . . . . . . . . . . page 6-1
6.2 To Uninstall a Device . . . . . . . . . . . . . . . . . . . . . . . . page 6-3
6.1 TO CHANGE
DEVICE
CONFIGURATION
Once a device is installed and configured, you can modify the current settings
at any time by opening the Properties dialog.
To open the Properties dialog do the following:
1. In the WinSetup Workspace window select the desired device.
2. Open the Devices folder and select the device icon.
Properties
3. Click the right mouse button and choose the Properties option, or from
the Service menu choose the Devices/Properties option.
4. The device properties window (5900S RLG Properties window in this
example, see the next page) appears with various tabs allowing you to
change the current device settings.
www.rosemount-tg.com