emerson-300510en-users-manual

Recommendations

Info

Rosemount Raptor System Configuration Manual 300510EN, Rev AA December 2010 Device Tag Setup Level Tags and ATD Tags are configured automatically based on the tank names in the 2410 Tank Hub Tank Database window and the configuration of tag prefixes in the Preferences/Tag Prefix window, see “Setting the Name Tag Prefixes” on page 5-20. However, it is possible to edit the Level Tags and ATD Tags. 17. Verify that the TankMaster Level Tag is correct or type a new one. 18. Verify that the TankMaster ATD Tag is correct or type a new one. If the ATD tag field is empty and disabled then no ATD device is associated with that tank position. 19. Click the Next button to continue the installation procedure. 5-44 Section 5. Installing a Raptor Level Gauging System
System Configuration Manual 300510EN, Rev AA December 2010 Rosemount Raptor Local Display Setup Choose the parameters to be displayed on the integral display panel on the Rosemount 2410 Tank Hub. The display will alternate between the selected items at a rate given by the Display Toggle Time. 20. In the Units for Display pane, choose the desired measurement units from the drop-down lists. These measurement units will be used by the 2410 local display when presenting the various tank variables. 21. In the Display Tanks pane, select check boxes for the tanks that you want to present in the 2410 integral display. 22. In the Display Tank Parameters pane, choose the tank parameters to be displayed by checking the appropriate boxes. See Table 5-4 below for more information on available parameters: Table 5-4. Various Tank Parameters can be presented on the 2410 local display Variable Level Distance Level rate Signal strength Free water level Vapor pressure Liquid pressure Air pressure Air temperature Vapor temperature Product temperature Tank temperature Description The current product level in the displayed tank. Distance (ullage) is measured from the Tank Reference point to the product surface. The speed at which the product surface moves when emptying or filling the tank. The signal strength of the radar level gauge measurement signal. Water surface level at the bottom of the tank. Available when a water level sensor is installed in the tank. Tank vapor pressure. Product liquid pressure. Ambient air pressure. Ambient air temperature. Tank vapor temperature. Average temperature of the product. Average temperature of product and vapor in the tank. Section 5. Installing a Raptor Level Gauging System 5-45
Page 1:
System Configuration Manual 300510E
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30: System Configuration Manual 300510E
Page 79: System Configuration Manual 300510E
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 246:
show all

emerson-300510en-users-manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?