emerson-300510en-users-manual

System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
This field shows which 2410 Tank
Hub that the radar level gauge is
connected to
This field shows the tank position
in the 2410 Tank Database
3. Select the Communication tab.
4. Verify the communication settings. The Connected to HUB field indicates
which tank that the 5900S is associated with in the 2410 Tank Database.
Normally, the single tank version of the Rosemount 2410 Tank Hub is
used for Rosemount 5900S level gauges. In this case the Position in
2410 HUB field will be equal to 1 since there is only one tank position
that is used in the 2410 Tank Database.
In case the multiple tank version of the Rosemount 2410 is used to
connect several tanks, the level gauge can be mapped to another tank
through the 2410 Tank Hub Properties/Tank Database window (in the
WinSetup workspace, click the right mouse button on the 2410 icon and
choose the Properties option).
See “Tank Database Setup” on page 5-42 for more information on
2410 Tank Database setup.
5. Verify that the Modbus address is correct.
To change the Modbus address click the Change button to open the
Change Address window:
Section 5. Installing a Raptor Level Gauging System
5-53