emerson-300510en-users-manual

Rosemount Raptor
System Configuration Manual
300510EN, Rev AA
December 2010
7.10.3 File Storage To save Tank Scan data displayed in the Graph Area
1. In the Tank Scan window click the Save button.
2. Enter a name to identify the tank scan data. You may also type a
comment in the Comment field (not required). This can for example be
used to describe any special circumstances under which the Tank scan
data was obtained.
3. Press the OK button.
NOTE!
The default data storage file is named StrTankScanII.dat. The file is stored in
the following folder: C:\Program Files\Rosemount\Lib\Data\.
7-26 Section 7. Service Functions