emerson-300510en-users-manual

Recommendations

Info

Rosemount Raptor System Configuration Manual 300510EN, Rev AA December 2010 6. Assign devices to the current tank. 1. Select a device 2. Click this button 3. The devices appear in the Selected Devices pane Choose a device from the list in the Available Devices pane and click the arrow button to move the device to the Selected Devices pane. NOTE! It is recommended that devices are installed prior to installing tanks. In a Raptor system field devices should be installed as described in “Installation Procedure” on page 5-2. 5-104 Section 5. Installing a Raptor Level Gauging System
System Configuration Manual 300510EN, Rev AA December 2010 Rosemount Raptor Show 2160 FCU Slave Positions (Advanced) The “Show Slave Positions” check box should only be used for advanced tank configuration of devices which are not supported by the Raptor system. A Rosemount Raptor device which is connected to the Tankbus and configured in the 2160 FCU Slave Database, will appear in the Available Devices pane at the left-hand side of the Select Devices window. In case a device which can not be identified by the Raptor system is connected to the Tankbus, you will have to select the “Show Slave Positions” check box in order to map this device to a tank. To associate an “unknown” device to a tank do the following: a. In the Select Devices window, check the Show FCU Slave Positions check box to display the positions of the 2160 FCU Slave Database. b. In the Select Devices window choose the Slave Database position that corresponds to the tank where the device is installed. In the example above the devices are mapped to position 3 which is identified as FCU-201.03 in the FCU Slave Database. c. Move the selected item to the Selected Devices pane by clicking the button. 7. Click the Next button to proceed with the tank installation. Section 5. Installing a Raptor Level Gauging System 5-105
Page 1:
System Configuration Manual 300510E
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90: System Configuration Manual 300510E
Page 139: System Configuration Manual 300510E
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 246:
show all

emerson-300510en-users-manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?