emerson-300510en-users-manual

Recommendations

Info

Rosemount Raptor System Configuration Manual 300510EN, Rev AA December 2010 5.1 SYSTEM CONFIGURATION OVERVIEW 5.1.1 Preparations Before installing a Rosemount Tank Gauging system you should ensure that the following information is available: • A plan of all field devices and tanks. • Unit IDs of each device (Unit ID is a unique identifier given to each Raptor device at factory). • Modbus addresses of level devices and ATD devices. The Raptor devices are shipped with default addresses which will be changed at system configuration. The Modbus addresses are configured in the Slave Database of the 2160 FCU and the Tank Database of the 2410 Tank Hub as described below. • Tank geometry parameters and reference distances such as tank reference height (R) and distance between Zero level (datum plate) and tank bottom. • Antenna types used for the various level gauges. 5.1.2 Installation Procedure Installation and configuration of a Rosemount Raptor level gauging system includes the following steps as briefly described below: 1 Communication Protocol Setup Specify communication protocol parameters: • The Modbus Master Protocol handles communication between a TankMaster work station and field devices such as the Rosemount 2160 Field Communication Unit and the Rosemount 2410 Tank Hub. • The Slave Protocol handles communication with a host computer. • Communication with TankMaster can be supervised by logging various error types and function codes. 2 Preferences Specify measurement units, tag prefixes for tank and device labels, inventory parameters, and parameters to be displayed when viewing tank data. 3 Installation and Configuration of 2160 Field Communication Unit The Rosemount 2160 Field Communication Unit (FCU) has to be installed and configured prior to installing other devices such as a Rosemount 2410 Tank Hub and a Rosemount 5900S Radar Level Gauge. To install a Rosemount 2160 FCU: • Assign a Modbus communication address • For each communication port, configure protocol and appropriate communication parameters • Configure the Slave Database with information about the devices connected to the fieldbus 5-2 Section 5. Installing a Raptor Level Gauging System
System Configuration Manual 300510EN, Rev AA December 2010 Rosemount Raptor Figure 5-1. Raptor system installation procedure TankMaster workstattion Plant Host Computer 1. Communication setup. See “Communication Protocol Setup” on page 5-6. Rosemount 2180 Field Bus Modem 2. Preferences. See “Preferences” on page 5-16. GROUP BUS Rosemount 2160 Field Communication Unit 3. Rosemount 2160 Field Communication Unit installation and configuration. See “Installing a Rosemount 2160 FCU” on page 5-25. Rosemount 5900S Radar Level Gauge FIELD BUS Rosemount 2240S Multi-Input Temperature Transmitter Rosemount 2410 Tank Hub 4. Rosemount 2410 Tank Hub installation and configuration. See “Installing a Rosemount 2410 Tank Hub” on page 5-38. TANKBUS 5. Device installation and configuration. See for example “Installing a Rosemount 5900S Radar Level Gauge” on page 5-51 and “Installing Auxiliary Tank Devices” on page 5-65. 6. Tank installation and configuration. See “Installing a Tank” on page 5-101. Rosemount 2230 Graphical Field Display 7. Calibration. See “Level Gauge Calibration” on page 5-122. Section 5. Installing a Raptor Level Gauging System 5-3
Page 1: System Configuration Manual 300510E
Page 5 and 6: System Configuration Manual 300510E
Page 37: System Configuration Manual 300510E
Page 89 and 90:
System Configuration Manual 300510E
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 246:
show all

emerson-300510en-users-manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?