emerson-300510en-users-manual

Rosemount Raptor
System Configuration Manual
300510EN, Rev AA
December 2010
3.4 INSTALLING A
TANK LEVEL
GAUGING SYSTEM
3.5 ILLEGAL
CHARACTERS
Setting up a Tank Level Gauging system comprises installation and
configuration of devices and tanks.
Tank installation
Tank installation includes specifying tank type, specifying transmitters to
associate with the tank, and to define which source signals to use as input for
various tank measurement variables.
Device installation
Device installation includes tasks such as configuration of field bus
communication, specifying tank height and other geometrical parameters,
configuration of device specific parameters for radar level gauges,
temperature and pressure transmitters.
Wizards
In order to facilitate the installation process, TankMaster WinSetup guides you
through the installation procedure by using so called “wizards”. WinSetup
automatically walks through a step-by-step procedure which lets you focus on
the important issues rather than trying to remember what to do next. The
Online Help provides information for each step in case you need further
assistance.
Naming objects in TankMaster using certain characters may cause
TankMaster to malfunction. The following characters should be avoided:
\ Reverse solidus % Percent sign
/ Solidus < Less-than sign
? Question mark > Greater-than sign
* Asterisk { Left curly bracket
[ Left square bracket } Right curly bracket
] Right square bracket ' Apostrophe
| Vertical line " Quotation mark
3-6 Section 3. Using TankMaster