emerson-300510en-users-manual

Recommendations

Info

Rosemount Raptor System Configuration Manual 300510EN, Rev AA December 2010 Using the installation wizard To configure a Rosemount 5300 by using the WinSetup installation wizard perform the following steps: 1. In the Workspace window select the Devices folder. 2. Click the right mouse button and select Install New, or from the Service menu choose Devices/Install New. The Select Device window appears: 3. Choose Device Type 5300 Guide Wave Radar from the drop-down list. 4. Enter the level tag used for the 5300. 5. Click the Next button to open the 5300 GWR Communication window. 5-96 Section 5. Installing a Raptor Level Gauging System
System Configuration Manual 300510EN, Rev AA December 2010 Rosemount Raptor 6. In the 2410 Tag drop-down list choose the Rosemount 2410 Tank Hub that the 5300 radar is connected to. 7. Enter the Modbus address that is used for the 5300. Note that this address must be stored in the 2160 FCU Slave Database as well as in the 2410 Tank Database. 8. Click the Verify Communication button to verify that the TankMaster PC communicates with the 5300. The Unit ID will appear when contact is established. 9. Verify the tank position. The Position in 2410 HUB field shows the tank position that the 5300 is mapped to in the 2410 tank database. The tank position indicates which tank the 5300 is associated with. In case the 5300 radar is connected to a multiple tank version of the Rosemount 2410, the 5300 can be mapped to another tank position via the 2410 Tank Hub Properties/Tank Database window if necessary (in the WinSetup workspace, click the right mouse button on the 2410 icon and choose the Properties option). See “Tank Database Setup” on page 5-42 for more information on how to configure the 2410 Tank Database. 10. Click the Next button to proceed with the 5300 configuration. 11. For configuration of the 5300 GWR Probe window refer to the appropriate parts in “Configuration via 5300 Properties” on page 5-91. 12. For configuration of the 5300 GWR Environment window refer to the appropriate parts in “Advanced Configuration” on page 5-99. Section 5. Installing a Raptor Level Gauging System 5-97
Page 1:
System Configuration Manual 300510E
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82: System Configuration Manual 300510E
Page 131: System Configuration Manual 300510E
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 246:
show all

emerson-300510en-users-manual

Create successful ePaper yourself

Delete template?

Save as template?