emerson-300510en-users-manual

System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5.3.2 Ambient Air
Temperature
To change the Ambient Air Temperature preferences do the following:
1. Select the desired server (e.g. “This Workstation”) in the WinSetup
workspace.
2. Click the right mouse button and choose Setup, or from the Service
menu choose Servers>Setup.
3. In the Server Preferences window select the Ambient Air Temperature
tab:
4. Choose Auto when there is a temperature sensor available that can be
used for Ambient Air Temperature measurements. Otherwise, select the
Manual option and type a value for the Ambient Air temperature.
• Device. Click the button and select the device to which a
temperature sensor is connected.
• Ambient Air Temp Source. Select temperature source associated
with the selected device. In a Raptor system the associated
temperature transmitter has to be configured in the tank database of
the 2410 Tank Hub (see “Installing a Rosemount 2410 Tank Hub” on
page 5-38 for more information).
• Sensor. Choose the specific sensor to be used for Ambient Air
Temperature.
• Value Range. The Value Range defines the minimum and maximum
values when Ambient Air Temperature is manually entered.
5. Click the OK button to save the current setting and close the window.
Section 5. Installing a Raptor Level Gauging System
5-17