emerson-300510en-users-manual

Recommendations

Info

Rosemount Raptor System Configuration Manual 300510EN, Rev AA December 2010 13. In the 5300 GWR Summary window click the Finish button to finish the installation wizard. If the configuration needs to be changed click the Back button until the desired window appears. Further configuration options are available in the 5300 GWR window, see “Advanced Configuration” on page 5-99. 5-98 Section 5. Installing a Raptor Level Gauging System
System Configuration Manual 300510EN, Rev AA December 2010 Rosemount Raptor 5.10.3 Advanced Configuration In addition to the basic configuration there are advanced configuration options available for the Rosemount 5300 Guided Wave Radar. Environment conditions such as rapid level changes and dielectric constants of products as well as vapor dielectric constant can be configured. The 5300 GWR/Environment window can be used to optimize the 5300 Guided Wave Radar for special tank conditions as illustrated below. To configure Environment parameters for the Rosemount 5300: 1. In the Workspace window, select the Rosemount 5300 icon. 2. Click the right mouse button and choose the Properties option. The 5300 GWR window appears. 3. Select the Environment tab. Measurement Mode The 5300 is pre-configured according to the specified model and normally the measurement mode does not need to be changed. Rapid Level Change Select the Rapid Level Change check box if the surface is moving quickly up or down at rates over 0.1 m/s (4 inch/s). Dielectric Constant/Dielectric Range The Product Dielectric Range is used for setting the appropriate signal amplitude thresholds in order to filter out noise from the measurement signal. In interface level measurements, dielectric constants can be configured for both the upper and the lower products. For the Product Dielectric Range choose option Unknown if the correct value range is not known or if the contents of the tank is changing on a regular basis. Section 5. Installing a Raptor Level Gauging System 5-99
Page 1:
System Configuration Manual 300510E
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84: System Configuration Manual 300510E
Page 133: System Configuration Manual 300510E
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 246:
show all

emerson-300510en-users-manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?