emerson-300510en-users-manual

Recommendations

Info

Rosemount Raptor System Configuration Manual 300510EN, Rev AA December 2010 7.14.5 Restore If the PC operating system has crashed resulting in corrupt TankMaster files, the TankMaster settings can be restored by using the backup files. To restore the TankMaster configuration and data files do the following: 1. Check that WinSetup and WinOpi are closed. You may click the Processes button in the TM Administrator program to check if any TankMaster programs are running. Note that the TankMaster Administrator program itself also appears in the Processes window, see “Processes” on page 7-55. (You may also open the Windows Task Manager to make sure that the Tankserver.exe program is closed). 2. Open the TankMaster Administrator window. 3. Click the Backup button. The Backup window appears. 4. In the Backup window click the Restore button. 7-50 Section 7. Service Functions
System Configuration Manual 300510EN, Rev AA December 2010 Rosemount Raptor 5. The Restore Backup Wizard lets you restore tank and device configuration, BatchServer data and Historical data. You may also restore WinOpi and WinSetup configurations such as groups, color, network settings etc. 6. Click the Next button and follow the instructions. You will now be guided through a step-by-step instruction that lets you specify the folder where backup files are stored, and the type of data to be restored. You may also create a backup of the current configuration. 7. When the backup source folder is selected, you will be prompted to specify the data to be restored: NOTE Do not select the Registry key option if upgrading from TankMaster version 4.H0 or older to version 4.H1 or newer. The Registry key option must not be used if TankMaster has been re-installed on another hard disk drive, or in another directory than the original installation. The file paths to the TankMaster configuration and data files must be the same for the backup files and the restored files. Section 7. Service Functions 7-51
Page 1:
System Configuration Manual 300510E
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174: System Configuration Manual 300510E
Page 223: System Configuration Manual 300510E
Page 246: System Configuration Manual 300510E
show all

emerson-300510en-users-manual

Create successful ePaper yourself

Delete template?

Save as template?