15.03.2017 Views

Introduction

87089-2017%20Guide%20to%20Crop%20Protection_complete

87089-2017%20Guide%20to%20Crop%20Protection_complete

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

98<br />

Broadleaves:<br />

Apply up to 4 leaf stage unless otherwise indicated.<br />

º Cleavers (1 to 4 whorls)<br />

º Cow cockle<br />

º Green smartweed<br />

º Kochia<br />

º Lamb’s-quarters<br />

* Suppression<br />

º Redroot pigweed<br />

º Round-leaved mallow*<br />

º Russian thistle*<br />

º Shepherd’s-purse<br />

º Stinkweed<br />

º Stork’s-bill (1 to 8 leaf)*<br />

º Volunteer canola<br />

(except Clearfield<br />

varieties)<br />

º Volunteer flax<br />

(1 to 12 cm)<br />

º Wild buckwheat<br />

º Wild mustard<br />

Rates:<br />

Altitude FX2 (1 case treats 40 acres)<br />

AC 299,263 120 AS: 67 mL per acre.<br />

Starane: 0. 24 L per acre.<br />

Altitude FX2 must be tank mixed with one of the registered tank mix options found under the “tank mix” section below. Add<br />

a non-ionic surfactant (such as Agral 90 or Ag-Surf II) at 0.25 L per 100 L of spray solution. Surfactant not included.<br />

DO NOT apply Altitude FX2 or other products containing imazamox, or fluroxypyr more than once per season.<br />

Refer to the product label for complete mixing instructions for this product and its mixes. A general guide to mixing can be<br />

found on page 8.<br />

Application Information:<br />

• Water Volume: 20 to 40 L per acre.<br />

• Nozzles and Pressure: Maximum 40 psi (275 kPa) when using conventional flat fan nozzles. Low drift nozzles may<br />

require higher pressures for proper performance. Use a combination of nozzles and pressure designed to deliver<br />

thorough, even coverage of ASABE coarse droplets.<br />

• Screens: Use 50 mesh or coarser on both nozzle and primary plumbing screens.<br />

How it Works:<br />

Refer to Table 9 on page 48.<br />

Effects of Growing Conditions:<br />

Initial crop injury may be observed after application but this is outgrown and should not affect yield. Severe crop injury will<br />

occur as a result of spray overlap. AVOID SPRAYER OVERLAP.<br />

DO NOT spray if temperatures of +5 o C are forecast within 3 days of application. Treat crops during warm weather when<br />

weeds are actively growing and soil moisture is adequate for rapid growth. Under cool or dry conditions, control of some<br />

weeds may be severely reduced.<br />

Tank Mixes:<br />

Herbicides:<br />

• Altitude FX2 must be mixed with one of the following:<br />

• 2,4-D Ester (213 g ae per acre)<br />

• Curtail M (0.61 to 0. 81 L per acre)<br />

Restrictions:<br />

• Rainfall: Rainfall within 3 hours after application may reduce activity.<br />

• Re-entry Interval: DO NOT enter treated fields for at least 12 hours.<br />

• Grazing Restrictions: DO NOT graze the treated crop within 14 days of application or cut for hay within 42 days of<br />

application.<br />

• Pre-harvest Interval: DO NOT apply within 79 days of harvest.<br />

• Re-cropping Interval: Winter wheat may be seeded 3 months after application. Barley, canola (all varieties), field peas,<br />

flax, lentils, oats, and spring wheat may be grown safely the year following application. Condiment mustard may be

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!