Introduction

573
• Environment: Ensure proper soil incorporation of the seeds. DO NOT feed treated seed to, or otherwise expose,
wildlife or domestic birds. DO NOT contaminate domestic or irrigation water supplies, lakes, streams, ponds or any
body of water with the chemical, used containers, treated seed or bags. DO NOT contaminate water by cleaning of
equipment or disposal of wastes.
Hazard Rating:
Caution – Poison
Caution – Eye irritant and potential skin sensitizer
For an explanation of the symbols used here see page 4.
Insure Pulse
Company:
BASF Canada – PCP#32011
Fungicide Group
4, 7, 11
Refer to page 437
Formulation:
17 g/L pyraclostrobin, 17 g/L fluxapyroxad and 10 g/L metalaxyl formulated as a liquid flowable.
• Container sizes - 9.8L, 120 L Drum, 450 L Tote
Crops, Diseases and Rates:
Crops Diseases controlled Diseases suppressed Rates per
100 kg of seed
Chickpea
Dry bean
Faba bean
Field pea
Lentil
Flax
Seed rot and seedling blight (soil-borne Fusarium
spp.); seed rot, seedling blight and root rot (soilborne
Rhizoctonia solani); seed rot and seedling
blight (soil-borne Pythium spp.); seedling blight
(seed-borne Ascochyta spp.)
Seed rot, seedling blight, and root rot (soil- borne
Fusarium spp.); seed rot, seedling blight, and root rot
(soil-borne Rhizoctonia solani)
Anthracnose seedling blight
(seed-borne Colletotrichum
lindemuthianum); root rot
(soil-borne Fusarium spp.);
seed rot and seedling blight
(seed-borne Botrytis cinerea)
300 ml
- 300 to 600* mL
* Use the lower rate under normal field conditions. Use the higher rate if there is a history of high disease pressures in
the field; OR where field conditions favour seed and soil-borne pathogens.
Seed Treatments
Application Information:
A ready-to-use seed treatment formulation for use in commercial seed treatment plants and for use in on-farm standard
gravity flow or mist type treatment machines. Can also be used in “On the Go” air seeder treatment systems. When used at
the recommended rate of 300 mL/100 kg seed, no additional dyes or dilutions with water are needed unless recommended
by the manufacturer of the seed treatment application equipment.
NOTE: If using the 600 mL per 100 kg rate (flax), it is highly recommended that the seed be treated into a bin or truck box to
allow the treated seed to dry prior to placing into the seeder hopper. This will prevent clumping and bridging in the seeder.