Introduction

294
Mecoprop-p
Herbicide Group
4 - mecoprop-p
(Refer to page 44)
Company:
Loveland Products Canada (Mecoprop-P - PCP#27891)
Formulation:
150 g/L mecoprop-p present as potassium salt formulated as a liquid.
Crops and Staging:
Spring wheat (including durum), barley and oats: 3 leaf to flag leaf stage.
Weeds, Rates and Staging:
Apply Mecoprop-P at 2.2 to 2.8 L per acre to weeds from the 2 to 4 leaf stage. Use the high rate for weeds in an advanced
stage of growth.
º Black medic
º Canada thistle (top
growth control only)
Application Information:
º Chickweed
º Cleavers
º Clover (volunteer)
º Corn spurry
º Lamb’s-quarters
º Plantain
º Wild mustard
• Water Volume: 81 to 121 L per acre.
• Nozzles and Pressure: Maximum 40 psi (275 kPa) when using conventional flat fan nozzles. Low drift nozzles may
require higher pressures for proper performance. Use a combination of nozzles and pressure designed to deliver
thorough, even coverage with ASABE coarse droplets.
How it Works:
Refer to Table 9 on page 48.
Effects of Growing Conditions:
Apply in warm weather under good growing conditions. Avoid spraying in very hot weather or in drought conditions.
Tank Mixes:
None registered.
Restrictions:
• Rainfall: No rainfast period is specified on the label; required interval may be up to 8 hours. Contact manufacturer for
more information.
• Grazing Restrictions: DO NOT graze or feed treated crop to livestock prior to crop maturity.
• Re-cropping Interval: No restrictions the year after application.
• Aerial Application: DO NOT apply by air.
• Storage: DO NOT freeze.