Introduction

356
Retain SG
This product is a prepackaged tank mix of the equivalent of thifensulfuron/
tribenuron (page 395) and fluroxypy + 2,4-D (page 218). Information listed
is restricted to Crop, Weeds and Rates. For other detailed information on the
component products see the product pages listed above.
Herbicide Group
2 - thifensulfuron
& tribenuron
4 - fluroxypyr & 2,4-D
(Refer to page 44)
Company:
Loveland Products Canada
Formulation
The Retain SG package has 3 components:
Retain A (PCP#30129): 33.35% thifensulfuron + 16.65% tribenuron formulated as a water soluble granule.
• Container size - 486 g
Retain B (PCP#29557): 180 g/L fluroxypyr formulated as an emulsifiable concentrate.
• Container size - 4.8 L
Loveland Products Canada 2,4-D ester 700 (PCP#29006): 660 g/L 2,4-D ester formulated as an emulsifiable concentrate.
• Container size - 6.8 L
Crops and Staging:
Spring wheat (including durum), barley: 4 leaf to flag leaf stage.
Weeds and Staging:
Apply from the seedling to 4 leaf or whorl stage of the following weeds:
• Weeds controlled by thifensulfuron/tribenuron plus cleavers*
* Not Group 2 resistant biotypes
Rates
Retain A: 8 g per acre.
Retain B: 0.12 L per acre
Loveland Products Canada 2,4-D: 0.2 L per acre
Add Agral 90, Agsurf II, or Citowett Plus at 0.2 L per 100 L of spray solution.
Retain SG may degrade if left in the sprayer for an extended period. Apply within 24 hours of mixing.
Tank Mixes:
Loveland Products Canada supports the following mixes that are not on the Retain SG label. Apply mixes according to
the most restrictive use limitations for either product:
• Herbicides: Axial, Everest 2.0, Traxos, Simplicity, Varro, WildCat, Puma Advance.
Refer to the product label for complete mixing instructions. A general guide to mixing can be found on page 8.
See component products for more information on restrictions application details and handling. Use the most limiting
restrictions across all components for the mix.