Introduction

202
Formulation:
The Frontline 2,4-D XC package has 2 components:
Frontline 2,4-D XC A (PCP#30060): 50 g/L florasulam formulated as a suspension concentrate
Frontline 2,4-D XC B (PCP#30061): 660 g/L 2,4-D LV ester formulated as an emulsifiable concentrate.
• Container sizes:
Frontline 2,4-D XC A: 1.6 L. Frontline 2,4-D XC B: 2 x 6.8 L
-or-
Spitfire (PCP#31252), MPower Battlefront (PCP#31325): 50 g/L florasulam formulated as a suspension concentrate.
• Container size - 2 x 6.4L
(2,4-D Ester component purchased separately)
Crops and Staging:
Spring wheat (including durum): 3 rd leaf fully expanded to 6 leaf stage.
When mixing, always check the tank mix partner recommendations for additional staging restrictions.
Weeds and Staging:
Broadleaf weeds controlled at the 2 to 4 leaf stage:
º Bluebur
º Burdock
º Chickweed
º Cleavers
º Cocklebur
º Dandelion*
º Flixweed
Broadleaf weeds suppressed:
º Canada thistle (top
growth control only)
º Hemp-nettle
º Lamb’s-quarters
º Mustard (ball, wild)
º Narrow-leaved hawk’sbeard
(up to 2 leaf )
º Plantain
º Prickly lettuce
º Ragweed (common)
º Perennial sow-thistle
(top growth control
only)
* Seedlings and overwintered rosettes
†
Including all herbicide-tolerant canola varieties
º Redroot pigweed
º Russian thistle
º Shepherd’s-purse
º Smartweed (including
lady's-thumb)
º Sow-thistle (annual)
º Stinkweed
º Sunflower (annual)
º Tartary buckwheat
º Vetch
º Volunteer canola †
º Wild buckwheat
º Wild radish
Rates:
Frontline 2,4-D XC A: 40 mL per acre
Frontline 2,4-D XC B: 340 mL per acre.
(One package treats 40 acres)
-or-
Spitfire or MPower Battlefront: 40 mL per acre. (2 x 6.4 L treats 320 acres)
-plus-
2,4-D Ester: 227 g ae per acre (purchased separately).
Maximum ONE APPLICATION of this product or other products containing florasulam WITHIN A TWO YEAR TIME SPAN.
Refer to the product label for complete mixing instructions for this product and its mixes. A general guide to mixing can be
found on page 8.
Application Information:
• Water Volume: 40 L per acre.
• Nozzles and Pressure: Maximum 30 to 40 psi (200 to 275 kPa) with conventional flat fan nozzles. Low drift nozzles
may require higher pressures for proper performance. Use nozzles and pressure designed to deliver thorough, even
coverage with ASABE coarse droplets.