Introduction

464
Rate:
Apply Curzate 60 DF at 90 g per acre
Plus
Manzate DF or Manzate Pro-Stick at 540 g to 650 g per acre
Application Information:
• Water Volume:
• Ground: Utilize sufficient water to obtain thorough coverage - 80 to 400 L per acre.
• Aerial: Apply by air with a minimum water volume of 20 L per acre.
How it Works:
The active ingredient cymoxanil is a cyanoacetamide-oxime fungicide with locally systemic activity. To be used as a
preventative, curative and inhibitive (antisporulant) fungicide application. For more information refer to “Fungicide Modes
of Action” on page 435.
Tank Mixes:
DO NOT use Curzate 60 DF alone. Use only in a tank mix with Manzate DF or Manzate Pro-Stick.
Restrictions:
• Resistance management: Refer to page 434.
• Maximum number of applications: DO NOT exceed 4 applications of this product per season.
• Grazing: No restrictions listed.
• Preharvest interval: 8 days
• Re-entry: DO NOT re-enter treated areas within 24 hours of application.
• Re-cropping: No restrictions listed.
• Storage: Store product in original container in a secure, dry area away from food or feed. Protect against humid air and
water. Not for use or storage in or around the home. Keep container tightly closed.
• Environment: A buffer zone of 50 m is required between the down-wind edge of the boom and sensitive aquatic
habitats such as ponds, lakes, rivers, streams, and wetlands. DO NOT contaminate these habitats when cleaning and
rinsing equipment or containers. DO NOT clean sprayer near well or water source or near desirable vegetation.
Hazard Rating:
Danger – Poison
Caution – Eye irritant
For an explanation of the symbols used here see page 4.