Introduction

424
• Buffer Zones:
Application method
Buffer Zones (metres † ) Required for the Protection of:
Aquatic Habitats of Depths
Terrestrial habitat
Less than 1 m
Greater than 1 m
Ground * 1 0 1
Fixed wing aircraft 1 0 30
Helicopter 1 0 30
See page 35 for an explanation of the different habitats.
* Buffer zones can be reduced by 70% when using shrouds and by 30% when using cones mounted less than
12 inches from the crop canopy.
†
Distance measured as metres from the downwind edge of the spray boom to sensitive habitat.
Sprayer Cleaning:
Refer to ‘Method A’ in the general section on sprayer cleaning on page 9. If mixing with other pesticides, combine this
method with the method indicated for the tank mix partner.
Hazard Rating:
Warning – Eye and Skin Irritant.
For an explanation of the symbols used here see page 4.
Velocity m3
Company:
Bayer CropScience (PCP#29584)
Herbicide Group
2 - thiencarbazone
6 - bromoxynil
27 - pyrasulfotole
(Refer to page 44)
Formulation:
5 g/L thiencarbazone-methyl, 31.3 g/L pyrasulfotole and 175 g/L bromoxynil formulated as a suspension concentrate
• Container size - 8.1 L and 129.6 L
Crops and Staging:
Spring wheat (including durum):
• 1 to 6 main stem leaf stage to a maximum of 3 tillers, and before the first node can be felt in the stem. Under drought
conditions, do not apply if there is >35 days between seeding and spraying, as drought hastens crop development.
Winter wheat:
• Spring or fall from 1 to 6 leaf stage and before the first node can be felt in the stem.
DO NOT apply after the first node is detectable in the stem as crop injury may occur.
Weeds and Staging:
Grass weeds controlled from 1 to 6 main stem leaves and prior to the emergence of the 3 rd tiller:
º Barnyard grass º Foxtail (green and
º Canaryseed
º Wild oat
yellow † )
º Persian darnel † º Japanese brome †