Introduction

201
How it Works:
Refer to Table 9 on page 48.
Effects of Growing Conditions:
Moisture is necessary to activate the herbicide for residual weed control. Dry weather following application of the herbicide
may reduce effectiveness. Extremes in environmental conditions such as temperature, moisture, soil conditions, and
cultural practices may affect activity.
Tank Mixes:
None registered.
Restrictions:
• Rainfall: Within 4 hours may reduce control.
• Re-entry Interval: DO NOT re-enter treated fields for 12 hours.
• Pre-harvest Interval: Leave at least 90 days from application to harvest.
• Grazing Restrictions: DO NOT graze treated crop or cut for hay.
• Re-cropping Interval: Winter wheat may be sown 4 months after application. Spring wheat, dry beans, soybeans and
field corn may be grown the year following an application. These re-cropping restrictions refer only to the Red River
Valley of Manitoba. Use outside this is region is not registered as re-cropping options have not been determined.
• Aerial Application: DO NOT apply by air.
• Storage: Store above -10°C, in a dry place in original container, away from food or feed.
• Buffer Zones: Leave a buffer zone of at least 15 m between the last spray swath and the edge of sensitive terrestrial
areas such as shelterbelts, hedgerows and shrublands as well as aquatic areas such as ponds, streams, rivers, prairie
potholes and sloughs. DO NOT apply when winds are greater than 15 km/hr.
Weed Control
Sprayer Cleaning:
Refer to ‘Method B’ in the general section on sprayer cleaning on page 9 and 10.
Hazard Rating:
Warning – Eye Irritant.
For an explanation of the symbols used here see page 4.
Florasulam + 2,4-D
Company:
Dow AgroSciences (Frontline 2,4-D)
FMC Corporation (Spitfire)
Agracity (MPower Battlefront)
Herbicide Group
2 - florasulam
4 - 2,4-D
(Refer to page 44)